FREQUENTLY ASKED QUESTIONS
Top Dead Center Setting
 HOW ABOUT SETTING THE TIME GAINED THE TOP DEAD CENTER?
It ensures that encoder level that is used for the press stops on the top dead center even at different cycles. PLC program enables the user to save time with no nees to make these settings.
Piano Type Beam Box
 HOW TO CONTROL ALL MOVEMENTS OF THE PRESS?

PLC system and the touch screen that are used for the beam box enable to control all movements of the press digitally,  and it is compatible with all and drivers ( be it mechanic, pneumatic and servo) that can be used for these presses.

 
Ram Setting Mechanısm
 HOW TO REDUCE SETUP TIME FOR THE USER?
The encoder that is used for recording enables the user to see the extent of movements downwards and upwards while he adjust the the mold, which saves him the setting period. 
Thin Lubrıcation Center
 WHAT ARE THE ADVANTAGES OF THIN LUBRICATION CENTER?

It enables instant checks to see digitally (PLC) whether or not the lubrication reaches every single point by means of fully automatic thin lubrication system. In case of no lubrication flow, the machine stops with a signal transmitted from PLC for the purposes of self-protection. For this reason, the machine is self-lubricating with no need for any further controls, or it stops automatically in case of a problem. 

 
Speed Control Unıt
 USE OF THE SYSTEM WHICH PROVIDES THE PRESS DIFFERENT ROTATION? 
This is an electronic system that alters the operating speed of the press, which enables the operator to use different molds at different cycles.
Hydraulic Insurance System
 WHAT IS THE DIFFERENCE BETWEEN HYDRAULIC INSURANCE AND MECHANICAL INSURANCE?

If the machinery is exposed to over loading due to compaction (i.e. sheet metal compaction and different sheet thickness) of the mold during its operation causes severe damages in the mold and the machines. To avoid such damages, we use hydraulic insurance, which prevents them in the first place. Mechanical Insurance, which is also used as an insurance system, is also avaliable. However, it is know that the Mechanical Insurance breaks off after it completes the assigned task. It takes quite a lot of time for such machinery to recover and operate again. On the other hand, there is no broken part whatsoever with the Hydraulic Insurance, plus re-operation does not cause us to lose time

 
Air Cushion
 WHAT IS THE MECHANISM OF THE AIR BAG?
This is a supplementary mechanism that equalizes the weight of records during the operation of the press, hence ensured persistence of the requested tonnage. Air bags that are used for the presses are of a certain standard and exposed to a set of tests.
 
FOR YOUR OTHER QUESTIONS
You can contact us for your other questions or you can ask question by filling the form below.
Fullname
Message Title
Your Message
E-Mail address
Web Site



Ip Adres : 3.238.72.122